Deck Placement Sequence Dialog

Setting	Description
Add Stage	Press this button to add a stage to the deck placement sequence.
Delete Stage	Press this button to delete the currently highlighted stage in the grid.
Name	Enter the stage name. The first stage is always initial and the last stage is always final.
Component Steel	This non-editable column is always set to steel because there is always a steel component. This section is for reference only.
Component Concrete	For each stage other than Initial and Final, the drop-down list in this column allows the selection of the slab segments that are being poured in the stage. The slab segments that can be selected will be those defined in the Deck Slab command. The system will allow a given slab segment to be selected in one stage only.
Deck Overhang	Enter construction load value to compute the flange moment(with the appropriate factors applied based on the user selected Strength load combination), flange moment which will be passed to the code checker. For more details, check below Deck Overhang Loads topic.
Const	Enter construction load value to compute the flange moment(with the appropriate factors applied based on the user selected Strength load combination), flange moment which will be passed tot the code checker.
Fin. Machine	Enter construction load value to compute the flange moment(with the appropriate factors applied based on the user selected Strength load combination), flange moment which will be passed to the code checker.
Save DGN	Press this button to export all member group geometry to a MicroStation .dgn file. Save the .dgn file to the desired location and once the export is complete you can browse to the file location and open/view it in MicroStation
OK	Press this button to accept all changes and exit the command.
Cancel	Select this button to exit the command without saving changes.

Add Stage

Press this button to add a stage to the deck placement sequence.

Delete Stage

Press this button to delete the currently highlighted stage in the grid.

Name

Enter the stage name. The first stage is always initial and the last stage is always final.

Component Steel

This non-editable column is always set to steel because there is always a steel component. This section is for reference only.

Component Concrete

For each stage other than Initial and Final, the drop-down list in this column allows the selection of the slab segments that are being poured in the stage. The slab segments that can be selected will be those defined in the Deck Slab command. The system will allow a given slab segment to be selected in one stage only.

Deck Overhang

Enter construction load value to compute the flange moment(with the appropriate factors applied based on the user selected Strength load combination), flange moment which will be passed to the code checker. For more details, check below Deck Overhang Loads topic.

Const

Enter construction load value to compute the flange moment(with the appropriate factors applied based on the user selected Strength load combination), flange moment which will be passed tot the code checker.

Fin. Machine

Enter construction load value to compute the flange moment(with the appropriate factors applied based on the user selected Strength load combination), flange moment which will be passed to the code checker.

Save DGN

Press this button to export all member group geometry to a MicroStation .dgn file. Save the .dgn file to the desired location and once the export is complete you can browse to the file location and open/view it in MicroStation

OK

Press this button to accept all changes and exit the command.

Cancel

Select this button to exit the command without saving changes.